Zero Falls. Full Compliance.
OSHA 1926 Subpart M and DOLE DO-13 compliant fall protection systems for Philippine construction sites — engineered, installed, and maintained by certified specialists.
Why Fall Protection is Non-Negotiable
Falls are the leading cause of fatalities on Philippine construction sites. DOLE Department Order No. 13 mandates fall protection for any work at height above 1.8 meters. OSHA 1926.502 sets the engineering standards for system design and load capacity. Non-compliance results in stop-work orders, fines, and — most critically — preventable deaths. Our systems are engineered to meet both standards, protecting your workers and your project.
System Types
Choose Your System
OSHA 1926.502(b) / DOLE DO-13
Guardrail Systems
Passive perimeter protection for floor edges, roof edges, and open-sided platforms. No worker action required — the barrier is always in place.
Full GuideOSHA 1926.502(c) / ANSI A10.11
Safety Nets
Collective fall arrest for large open areas, formwork operations, and multi-level construction where guardrails are impractical.
Full GuideOSHA 1926.502(d) / ANSI Z359
Personal Fall Arrest Systems
Individual harness, lanyard, and anchorage systems for workers performing tasks at height where collective protection is not feasible.
Full GuideSelection Guide
How to Choose the Right System
| Factor | Guardrail | Safety Net | PFAS |
|---|---|---|---|
| Work Type | Permanent edges, walkways, platforms | Large open decks, formwork, multi-level | Roofing, steel erection, confined access |
| Worker Mobility | High — no PPE required | High — collective protection | Moderate — harness required |
| Installation Time | 1–3 days per floor | 2–5 days per bay | Hours per anchorage point |
| Reusability | High — modular systems | Moderate — inspect after each use | High — harness lifespan 5 years |
| Cost Range | Moderate upfront, low ongoing | Moderate — rental available | Low upfront, training required |
Standards
Regulatory Standards We Engineer To
DOLE DO-13
Construction Safety & Health
Mandates fall protection for work above 1.8m, requires safety officer on-site, and sets inspection protocols.
OSHA 1926 Subpart M
Fall Protection
Defines engineering requirements for guardrails (200 lb top rail load), safety nets (drop test), and PFAS (5,000 lb anchorage).
ANSI Z359
Fall Protection Code
Comprehensive standard for PFAS components: harnesses, lanyards, self-retracting lifelines, and anchorage connectors.
ANSI A10.11
Safety Nets
Specifies net mesh size, border rope strength, installation clearance, and drop test requirements.
Quick Assessment
What System Does Your Site Need?
What type of construction site do you have?
Free Resource
Get Your DOLE DO-13 Compliance Checklist
We'll email you the complete DOLE DO-13 and OSHA 1926 Subpart M compliance checklist for your site type — ready to use for your safety officer's pre-inspection review.
Send Me the ChecklistWe email the checklist within 1 business hour — no spam, no obligation.
Checklist Preview
Fall protection at all edges above 1.8m
DOLE DO-13 mandatory requirement
Licensed Safety Officer on-site
Required for projects with 20+ workers
Safety signage posted at all hazard areas
Bilingual (English/Filipino) required
Worker PPE inspection log
Daily pre-shift harness inspection records
Equipment load test certificates
Guardrail anchorages and PFAS anchor points
Worker training attendance sheets
PFAS donning, inspection, and rescue procedures
+ more items in the full checklist
FAQ
Common Questions
Protect Your Workers Today
Free site assessment. We identify hazards and recommend the right system for your project.
Book a Site Assessment